Kokkedal, May 17. 2017
Solid state relay connectors TopBrewer Compact.
Unfortunately our wire harness supplier have made a mistake when fitting the solid state relays in machine serie number
5701089 to 5701195 and 5701199 to 5701217 and 5701220 to 5701250 and 5701257, 5701268, 5701277, 5701282 and 5701283.
The relay pins has been pushed under the spring connectors not in the spring connectors.
After some time there is a risk that the connector will melt and loose contact.
At occasional service all 4 solid state relays have to be fitted correctly, following this procedure:
1.remove the screws in each 2.pull the solid state relays out. 3.push both spring connectors
solid state relay. in simultaneously, and push in the relay pins.
4.check that the spring con- 5.fit the screws again
nectors are engaged, by pulling
the solid state rely